Variable pump with high flow to make machine run faster.Compared with the same level of machine can speed up to 20%,and supposing the electrical power,the motor overload significantly can be reduced.Compared with dosing pumps,saving 25%-50%.
With a precise,effective oil filter can ensure the removal of oil svstem contamination and educe machine Maintenance probability.
By using spray tank of intenal oil tank to remove rust and iron for the internal hydraulic system contamination.
Patek Philippe Replica www.ppfake.net
In the piping system,together with the large diameter high pressure hose,making the system quieter.lower pressure of oil return line.
| SPECIFCATION | CN | BN150R | |||
| A | B | C | D | ||
| INJECTION UNIT | |||||
| Screw diameter | mm | 26 | 28 | 30 | 32 |
| Screw L/D ratio | l/d | 23 | 21.4 | 20 | 18.7 |
| Shot volume(theoretical) | cm3 | 80 | 93 | 107 | 121 |
| Injection weight(ps) | g | 73 | 85 | 97 | 110 |
| Injection pressure | mpa | 349 | 301 | 262 | 230 |
| Injection rate | g/s | 82 | 96 | 109 | 124 |
| Barrel centre distance | mm | 420 | |||
| CLAMPING UNIT | |||||
| Clamping force | kn | 1500 | |||
| Open storke | mm | 320 | |||
| Max.Mould height | mm | 120-460 | |||
| Space between tie ba(W×H) | mm | 720×370 | |||
| Mould platen | mm | 950×600 | |||
| Rotary table diameter | mm | 780 | |||
| Mold sets | set | 2 | |||
| Ejector strokex | mm | 85 | |||
| Ejector stroke | KN | 42 | |||
| OTHERS | |||||
| Pump pressure | MPa | 17.5 | |||
| Motor power | kW | 22+22 | |||
| Heating power | kW | 13 | |||
| Machine dimension(L×W×H) | m | 5.1x1.62x2.2 | |||
| Machine weight | t | 6.3 | |||
|
Platen Dimensions |
Mould Space Dimensions |
Floor Flan Layout |
|||
