Five-piece pivot double toggle clamping unit, integration of sttong SOlid frame structure to ensure that the ternplate force balanCed, high-speed, and stable．
Solid tempiate for large milling by EUROMAP standard”T”type slots and drilling tapping. And has a large bar space.
Ejector hydraulic cylinder can move flexible lcand the movement is extremely accurate.
Moving platen with skateboard under the form regulation can take part of vceight from the mold, reducing the load on the rod and aVoid many malfunction when using heavy mold.
| SPECIFICATION | CN | BN100II | ||
| A | B | C | ||
| INJECTION UNIT | ||||
| Screw diameter | mm | 34 | 37 | 40 |
| Screw L/D ratio | l/d | 22.8 | 21 | 22.7 |
| Shot volume(theoretical) | cm3 | 140 | 166 | 195 |
| Injection weight(ps) | g | 129 | 150 | 177 |
| Injection pressure | mpa | 254 | 215 | 184 |
| Injection rate | g/s | 86 | 100 | 117 |
| CLAMPING UNIT | ||||
| Clamping force | kn | 980 | ||
| Open stroke | mm | 330 | ||
| Space between tie ba(WxH) | mm | 365x365 | ||
| Max.Mould height | mm | 150-380 | ||
| Ejector force | kn | 38 | ||
| Ejector stroke | mm | 100 | ||
| OTHERS | ||||
| Pump pressure | mpa | 17.5 | ||
| Motor power | kW | 13/15 | ||
| Heating power | kW | 7 | ||
| Machine dimension(LxWxH) | m | 4.25x1.2x1.85 | ||
| Machine weight | t | 3.1 | ||
|
Platen Dimensions |
Mould Space Dimensions |
Floor Flan Layout |
||
